|
ECO-SOL Media
Eco-SOL Media List
Roland Eco-SOL Media has been carefully tested, profiled, and certified
to provide accurate and consistent print results every time.
ESM-CRVR Premium Reflective Vinyl
This premium-quality 3M 7 mil reflective vinyl has a special
adhesive so it is durable for a variety of graphic applications
including vehicle graphics. It is very durable and conformable to
irregular curves or indentations, but lamination is highly recommended
for vehicle applications or to protect images from abrasion and
chemical deterioration.
Available Widths in Inches: 48,24
ESM-LBV Light-Weight Banner Vinyl
This single-sided 13 oz. uncoated scrim banner vinyl is a great
all-purpose, low-cost banner alternative for a variety of indoor
and outdoor applications. It is very flexible and has a great white
point, and can be hemmed and grommeted to finish.
Available Widths in Inches: 103,73,54,30
ESM-PCV2 Premium Cast Vinyl, Permanent Adhesive
This new glossy cast vinyl offers excellent print quality and conformability
for a wide variety of jobs. This product has a special permanent
removable adhesive that is durable but easier to apply and remove
than traditional permanent adhesives. It is conformable to rivets
and irregular curves or indentations, although lamination is highly
recommended for any type of fleet or vehicle applications or to
protect images from abrasion and chemical deterioration.
Available Widths in Inches: 54,30
ESM-BOSB BlockOut Scrim Banner
This premium-quality two-sided blockout 20 oz. scrim banner vinyl
has a very smooth surface for superior printing on either side.
It can be hemmed and grommeted, and the high tenacity polyester
base cloth make it extremely dimensionally stable for a wide variety
of indoor and outdoor applications. Optimal heater setting is 40-50°
C (104-122° F).
Available Widths in Inches: 54
ESM-SGP Solvent Glossy Paper
This 7.5 mil glossy paper was specially coated for solvent ink printing
at a very attrractive price point. It has a good white point and
gloss level for a wide variety of indoor graphic applications. A
heat assist of 30-35° C (86-95° F) is helpful with this
product, but care should be taken not to heat the paper too aggressively.
Available Widths in Inches: 54,30
ESM-PRVP Premium Reflective Vinyl, Permanent Adhesive
This premium-quality 7 mil reflective cast uncoated vinyl has a
permanent adhesive so it is durable for a variety of graphic applications
including vehicle graphics. It is conformable to irregular curves
or indentations, but lamination is highly recommended for vehicle
applications or to protect images from abrasion and chemical deterioration.
Available Widths in Inches: 48,30
ESM-TVP Translucent Cast Vinyl, Permanent Adhesive
This high-quality 3M 2 mil translucent adhesive-back vinyl images
nicely in a variety of print modes and has a high-quality permanent
adhesive. It is designed for installation on flat or slightly curved
surfaces, and is durable both laminated and unlaminated, although
lamination is recommended for protection against abrasion and chemical
deterioration.
Available Widths in Inches: 54,30
ESM-CWVR Calendered Wrap Vinyl, Removable Adhesive
This high-quality 4 mil luster adhesive-back vinyl is designed for
many types of graphic applications, particularly vehicle wraps including
bus panels and taxi tops. It is the perfect companion product to
our VTVR ViewThru Vinyl for full vehicle coverage. This product
is also Transit Authority approved and has a removable adhesive
designed for clean removal after 1 year. While not truly conformable
to rivets and irregular curves or indentations, it is durable both
laminated and unlaminated, although lamination is recommended for
protection against abrasion and chemical deterioration.
Available Widths in Inches: 54,24
ESM-GCEZ Glossy Calendered Vinyl
This premium-quality 3.4 mil glossy calendered vinyl for solvent
printing has a special permanent removable adhesive that is as durable
but easier to apply and remove than traditional permanent adhesives.
This vinyl is not conformable to rivets and irregular curves or
indentations. Lamination is highly recommended for any type of vehicle
applications or to protect images from abrasion and chemical deterioration.
This product requires the highest heat settings for best results.
Available Widths in Inches: 54,30
ESM-FRSB Flame Retardant Scrim Banner
This premium-quality one-sided 16 oz. scrim banner vinyl is specially
treated for flame retardance. It has a high tensile strength and
tear resistance, and is perfect for a variety of applications both
indoors and out. It is dimensionally stable and can be hemmed and
grommeted for a superb finished look. Large banners displayed outdoors
should be tested for wind resistance depending on the required durability
and longevity of the application.
Available Widths in Inches: 54,30
ESM-CSFP Clear Solvent Film, Permanent Adhesive
This high-quality 4 mil clear adhesive-back polyester film has a
special topcoat for mild solvent ink printing. It images well for
a variety of applications. It has a permanent adhesive along with
excellent indoor durability. Care should be taken when handling
and mounting the film, and extra protection using a pressure-sensitive
overlaminate film is recommended for additional protection.
Available Widths in Inches: 48,24
ESM-CCVP Clear Calendered Vinyl, Permanent Adhesive
This high-quality 3 mil clear adhesive-back vinyl is designed for
many types of graphic applications. It images nicely in a variety
of print modes and has a permanent adhesive for a variety of applications.
While not conformable to rivets and irregular curves or indentations,
it is durable both laminated and unlaminated, although lamination
is recommended for protection against abrasion and chemical deterioration.
Optimal heater setting is 40-50° C (104-122° F).
Available Widths in Inches: 54,30
ESM-VTVR ViewThru Vinyl, Removable Adhesive
This perforated 7 mil adhesive-back vinyl is designed for window
graphics that require one-way view capability, including vehicle
window graphics. It is the perfect companion product to our CWVP
Calendared Wrap Vinyl for full vehicle coverage. While the product
images well, care should be taken to avoid over-saturation as ink
wells in the holes. This product is Transit Authority approved,
and the removable adhesive is designed to remove cleanly after 1
year. While not conformable to rivets and irregular curves or indentations,
it is durable both laminated and unlaminated, although lamination
is recommended for protection against abrasion and chemical deterioration.
Optimal heater setting is 40-50° C (104-122° F).
Available Widths in Inches: 53,24
ESM-LCT Premium Calendered Vinyl
This premium-quality 3M 4 mil luster calendered vinyl for mild solvent
printing has a special adhesive that set the industry standard for
ease of application and removal. This vinyl is perfect for use on
flat or slightly curved surfaces, and lamination is highly recommended
for any type of fleet or vehicle applications or to protect images
from abrasion and chemical deterioration.
Available Widths in Inches: 54,30
ESM-PGCT Premium Glossy Cast Vinyl
This premium-quality 3M 2 mil glossy cast vinyl for mild solvent
printing has a special adhesive that set the industry standard for
ease of application and removal. This vinyl is conformable to rivets
and irregular curves or indentations, although lamination is highly
recommended for any type of fleet or vehicle applications or to
protect images from abrasion and chemical deterioration.
Available Widths in Inches: 54,30
ESM-MCVP Matte Calendered Vinyl, Permanent Adhesive
This high-quality 3 mil matte adhesive-back vinyl is designed for
many types of graphic applications. It images nicely in a variety
of print modes and has a permanent adhesive for a variety of applications.
While not conformable to rivets and irregular curves or indentations,
it is durable both laminated and unlaminated, although lamination
is recommended for protection against abrasion and chemical deterioration.
Optimal heater setting is 40-50° C (104-122° F).
Available Widths in Inches: 54,30
ESM-CCV2 Clear Calendered Vinyl, Permanent Adhesive
This high-quality 3 mil clear adhesive-back vinyl is designed for
many types of graphic applications. It images nicely in a variety
of print modes and has a permanent adhesive for a variety of applications.
While not conformable to rivets and irregular curves or indentations,
it is durable both laminated and unlaminated, although lamination
is recommended for protection against abrasion and chemical deterioration.
Optimal heater setting is 40-50° C (104-122° F).
Available Widths in Inches: 54, 30
ESM-TCVR Translucent Calendered Vinyl, Removable Adhesive
This high-quality 6 mil translucent adhesive-back vinyl is designed
for many types of graphic applications. It images nicely in a variety
of print modes and has a removable adhesive for a variety of applications.
While not conformable to rivets and irregular curves or indentations,
it is durable both laminated and unlaminated, although lamination
is recommended for protection against abrasion and chemical deterioration.
Optimal heater setting is 40-50° C (104-122° F).
Available Widths in Inches: 54
ESM-GCVP Glossy Calendered Vinyl, Permanent Adhesive
This high-quality 3 mil glossy adhesive-back vinyl is designed for
many types of graphic applications. It images nicely in a variety
of print modes and has a permanent adhesive for a variety of applications.
While not conformable to rivets and irregular curves or indentations,
it is durable both laminated and unlaminated, although lamination
is recommended for protection against abrasion and chemical deterioration.
Optimal heater setting is 40-50° C (104-122° F).
Available Widths in Inches: 54,30
ESM-CSF Clear Solvent Film
This high-quality 3 mil clear polyester film has a special topcoat
for mild solvent ink printing. It images well for a variety of applications.
It is designed for excellent indoor durability although care should
be taken when handling the material.
Available Widths in Inches: 48,24
|
